Daily maintenance of unmanned vending machines
Outside of the vending machine: When there is dust on the outside of the machine, wipe it with a dry cloth. If there is too much dust and cannot be wiped off, dilute neutral detergent with warm water or water, and then clean the machine with a cloth dipped in the diluted solution.
Remind everyone that even if the dirt is not easy to remove, do not wipe the machine with solvents or alkaline liquids. The panel and selection buttons may crack.
Coin recognizer: Coins are easily stained during the circulation process. When the stained coins pass through the coin channel of the vending machine, it will stain the channel over time. If the dirt is too serious, it will cause the coin of the vending machine Performance failures such as selection, change, and refund.
Therefore, in order to maintain the good performance of the coin recognizer, the passage of the coin recognizer should be wiped at least once a month. Do not wipe with gauze moistened with hot water. Use a dry cloth or a slightly moistened cloth.
Pick-up port: Because the pick-up port of the vending machine is low and easy to be stained with dirt, merchants must wipe the outside and inside of the pickup port with a rag every time they replenish goods, leaving consumers clean Good impression of cleanliness.
Vending machines need to be well maintained during operation, and carefully maintained when they are not used for a long time. When a vending machine is not in use for a long time, it should be locked and the door of the vending machine should not be opened at will. First, take out all the goods in it.
Vending machine manufacturers suggest that the switch of the leakage protector is set to OFF and the power plug is unplugged. Then wipe the inside and outside of the vending machine clean, and at the same time pour out the water in the evaporator water storage box, and wipe it clean after cleaning. Then put a protective cover on the vending machine for safekeeping.
